Giant 3P/3P 10KVA-200KVA_Excel Energy Co., Ltd.

Product introduction

On-line UPS with built-in isolation transformer

With built-in isolation transformers, the Giant series will eliminate common mode noise and provide reliable isolated power for critical equipment.

main feature

●Real double conversion online UPS system

●DSP technology ensures high performance

●Built-in isolation transformer design

●Industrial grade design for various harsh conditions

●Intelligent battery management to extend battery life

●Independent air duct design can run continuously in harsh environment

●The number of battery cells is adjustable

●Dual input selection

●Up to 4 units can be operated in parallel

●Diversified communication interfaces

●Optional 7-touch color LCD screen

●Support input out-of-phase rectification and no N-line input

Product Specifications

MODEL		Giant 10K	Giant 15K	Giant 20K	Giant 30K	Giant 40K	Giant 60K
capacity		10 KVA / 8 KW	15 KVA / 12 KW	20KVA/16KW	30 KVA / 24 KW	40 KVA / 32 KW	60 KVA / 48 KW
ENTER
Rated voltage		3 x 380VAC/400VAC/415VAC (3Ph+N)
acceptable voltage range		165VAC ~ 280VAC (Ph-N); 285VAC ~ 485VAC (Ph-Ph)
frequency		50 Hz/60 Hz ± 10%
INVERTER
admissible	power factor	0.6~1 (inductive or capacitive)
admissible	Crest factor	3:1
admissible	overload	110% ~ 150% 10 min ~ 60 sec; 150% ~ 160% 60 sec~ 200ms; >160% 200ms
Limiting		High overload, short-circuit: RMS Voltage Limit; High Crest-Factor current: Peak Voltage Limit
Dynamic recovery time		3 cycles at 90 % of the static value
frequency		50/60 Hz synchronised ±1 %; With mains absent ±0.1 Hz
Unbalanced output voltage @ 100% unbalanced load		<1%
maximum sync speed		± 1Hz/s
Rated voltage		3 x 380VAC/400VAC/415VAC (3Ph+N)
phase		120º ±1% (balanced load); 120º ±2% (imbalances 50% of the load)
accurate		Stationary: ±1%; Transitory: ±5% (load variations 100-0-100%)
Total Harmonic Distortion (THDv)		<2% (Linear Load); <5% (Non-linear Load)
waveform		Pure Sine Wave
STATIC BYPASS
activation criteria		Microprocessor control
Overload allowed		0% ~ 150% continuous working; 150% ~ 180% 60 min~5 min; >180% 5 min
frequency		50 Hz/60 Hz ± 10%
retransfer		Automatic after alarm clear
transfer time		Zero
divert to bypass		Immediate, for overloads above 160%
type		Solid state
Voltage		176VAC~264VAC (Ph-N); 304VAC~456VAC (Ph-Ph)
MAINTENANCE BYPASS
frequency		50 Hz/60 Hz
overall efficiency	battery mode	90%		91%		92%
overall efficiency	line mode	89%		90%		91%
type		Without interruption
Voltage		3 x 400VAC(3Ph+N)
BATTERIES AND CHARGERS
charging method		CC/CV
Charging voltage		432 VDC (Based on 32pcs batteries)
Rated battery voltage		384 VDC (Based on 32pcs batteries)
precision		± 1%
Battery type and quantity		12 VDC x 32 pcs (29~32 pcs adjustable)
recharging current		Default 10A, *Maximum=Capacity(KW)/Battery Voltage(real-time).			Default 10A; Maximum 40A; 5A@ full load
PHYSICS
Dimensions, D X W X H (mm)		656 x 405 x 817			656 x 405 x 941	821 x 432 x 1159
Net weight (kg)		118	120	145	193	278	365

Model		Giant 80K	Giant 100K	Giant 120K	Giant 160K	Giant 200K
capacity		80KVA/64KW	100 KVA / 80 KW	120 KVA / 96 KW	160 KVA / 128 KW	200 KVA / 160 KW
ENTER
Rated voltage		3 x 380VAC/400VAC/415VAC (3Ph+N)
acceptable voltage range		165VAC ~ 280VAC (Ph-N); 285VAC ~ 485VAC (Ph-Ph)
frequency		50 Hz/60 Hz ± 10%
INVERTER
admissible	power factor	0.6~1 (inductive or capacitive)
admissible	Crest factor	3:1
admissible	overload	110% ~ 150% 10 min ~ 60 sec; 150% ~ 160% 60 sec~ 200ms; >160% 200ms
Limiting		High overload, short-circuit: RMS Voltage Limit; High Crest-Factor current: Peak Voltage Limit
Dynamic recovery time		3 cycles at 90 % of the static value
frequency		50/60 Hz synchronised ±1 %; With mains absent ±0.1 Hz
Unbalanced output voltage @ 100% unbalanced load		<1%
maximum sync speed		± 1Hz/s
Rated voltage		3 x 380VAC/400VAC/415VAC (3Ph+N)
phase		120º ±1% (balanced load); 120º ±2% (imbalances 50% of the load)
accurate		Stationary: ±1%; Transitory: ±5% (load variations 100-0-100%)
Total Harmonic Distortion (THDv)		<2% (Linear Load); <5% (Non-linear Load)
waveform		Pure Sine Wave
STATIC BYPASS
activation criteria		Microprocessor control
Overload allowed		0% ~ 150% continuous working; 150% ~ 180% 60 min~5 min; >180% 5 min
frequency		50 Hz/60 Hz ± 10%
retransfer		Automatic after alarm clear
transfer time		Zero
divert to bypass		Immediate, for overloads above 160%
type		Solid state
Voltage		176VAC~264VAC (Ph-N); 304VAC~456VAC (Ph-Ph)
MAINTENANCE BYPASS
frequency		50 Hz/60 Hz
overall efficiency	battery mode	93%
overall efficiency	line mode	92%
type		Without interruption
Voltage		3 x 400VAC(3Ph+N)
BATTERIES AND CHARGERS
charging method		CC/CV
Charging voltage		432 VDC (Based on 32pcs batteries)
Rated battery voltage		384 VDC (Based on 32pcs batteries)
precision		± 1%
Battery type and quantity		12 VDC x 32 pcs (29~32 pcs adjustable)
recharging current		Default 10A; Maximum 40A; 5A@ full load
PHYSICS
Dimensions, D X W X H (mm)		975 x 554 x 1286		975 x 635 x 1326	1051x705x1646
Net weight (kg)		471	573	650	760	790