产品概述：Note: The output power of the voltage stabilizer is special, it is proportional to the input voltage, it is generally recommended to match the actual load power···
SVC/TND5 series single-phase high-precision automatic AC voltage stabilizer is composed of contact auto-voltage regulator, servo motor, automatic control circuit, etc. When the grid voltage is unstable or the load changes, the automatic sampling control circuit sends a signal to drive the servo motor to adjust the position of the carbon brush of the auto-voltage regulator, so that the output voltage is adjusted to the rated value and reaches a stable state. This product has the characteristics of undistorted waveform, reliable performance and long-term operation. It has protection functions such as delay, overvoltage and undervoltage. It can be widely used in any place where stable voltage is required, and it is an ideal regulated power supply. Make sure your electrical equipment is functioning properly.
TND5 series high precision voltage regulator | |
Input voltage | 150V-260V |
The output voltage | 220V and 110V(0.5kVA-3kVA) 220V(5kVA-30kVA) |
Voltage regulation accuracy | Phase voltage 220V±3% 110V±6% |
frequency | 50Hz/60Hz |
number of phases | Simplex |
Adjust the time | <1 second (when the input voltage changes by 10%) |
efficiency | ≥95% |
temperature rise | <60℃ |
waveform distortion | No additional waveform distortion |
ambient temperature | -10℃~+40℃ |
Load power factor | 0.8 |
Insulation resistance | >5MΩ |
load power | 30% ~ 50% ~ 80% ~ 100% |
Display method | Single LCD watch |
Protection method | Over voltage protection, short circuit protection, delay protection, overload protection, temperature control protection, lightning protection |
Dielectric strength | 1500V/1min |
Overvoltage protection | 246V±4% |
Specification capacity | 2kVA~30kVA |
Voltage regulation method | Motor carbon brush/control circuit |
Pressure regulating coil material | Pure copper coil, long life |
Note: The output power of the voltage stabilizer is special, it is proportional to the input voltage, it is generally recommended to match the actual load power 3 times and above the voltage stabilizer to ensure the normal operation of the load equipment! | |
Standard sizes | ||||
Model Specifications | Product size (cm) | Packaging size (cm) | Packing quantity (only) | Gross weight (kg) |
TND5/SVC-2K | 24.5 × 25.8 × 19.5 | 60.5 × 35 × 25.5 | 2 | 17 |
TND5/SVC-3K | 23.5 × 29 × 23 | 61.5 × 38.5 × 29 | 2 | twenty three |
TND5/SVC-5K | 23 × 31.5 × 27.5 | 39.5 × 32 × 35 | 1 | 13 |
TND5/SVC-10K (ultra low voltage) | 31 × 34.5 × 53.5 | 45 × 42.5 × 62 | 1 | 33 |
TND5/SVC-10K | 31 × 34.5 × 53.5 | 45 × 42.5 × 62 | 1 | 36 |
TND5/SVC-15K | 28 × 38 × 77 | 49 × 40 × 86.5 | 1 | 52 |
TND5/SVC-20K | 32.5 × 38 × 77.5 | 49 × 44.5 × 88.5 | 1 | 59 |
TND5/SVC-30K | 37.5 × 41.5 × 78.5 | 53 × 49 × 88.5 | 1 | 74 |
